Specifications - Yamaha RY16-ML-SILK Manual De Instrucciones

Specifications

RY16-ML-SILK
General Specifications
Measured with an RPio622
DIGITAL OUT refers to the AES/EBU OUT of an RY16-AE inserted in another slot of the RPio622.
Output impedance of signal generator: 150 ohms
Frequency Response
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz @ 20 Hz – 20 kHz, reference to the nominal output level (-20dBFS) @ 1 kHz
Input Output
CH1 – 16 DIGITAL OUT
Total Harmonic Distortion
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Input Output
CH1 – 16 DIGITAL OUT
Total Harmonic Distortion is measured with an IHF-A filter.
Hum & Noise
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Input Output
CH1 – 16 DIGITAL OUT
Hum & Noise is measured with an IHF-A filter.
Crosstalk
@1 kHz Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
From/To To/From
CH N CH (N-1) or (N+1)
• Reference level is -1dBFS (N).
• Crosstalk is measured with an IHF-A filter.
Sampling Frequency
Frequency Range
Temperature Range
Temperature Range
Conditions
GAIN: +66dB
GAIN: -6dB
Conditions
-1dBFS output @ 1 kHz, GAIN: +66dB
-1dBFS output @ 1 kHz, GAIN: -6dB
Conditions
Rs=150 Ω, GAIN: +66dB
Rs=150 Ω, GAIN: -6dB
Conditions
Adjacent inputs, GAIN: -6dB
Conditions
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Conditions
Operating temperature range
Storage temperature range
Min. Typ Max.
-0.5 – 0.5
-0.5 – 0.5
Min. Typ Max.
– – 0.05
– – 0.05
Min. Typ Max.
– -86 –
– -116 –
Min. Typ Max.
– – -90
Min. Typ Max.
-1000 – +1000
Min. Typ Max.
0 – 40
-20 – 60
Units
dB
dB
Units
%
%
Units
dBFS
dBFS
Units
dB
Units
ppm
Units
°C
°C