Setting The Timer - Teac CR-H500 Manual Del Usuario

< Adjust the clock before setting the timer.
< Select "Direct mode" before using the iPod for the
timer; otherwise, the iPod will not be played back
when the On time is reached. See page 27.
< When no action is taken for 1 minute, the timer setting
mode will be cancelled.
1 Press the TIME SET button repeatedly until "On
time" is displayed.
"On time" appears on the display, and the "hour" value
blinks.
Press the scroll buttons (˙/¥) to set the hour
2
value, and press the ENTER button.
The "minute" value blinks.

Setting the Timer

Press the scroll buttons (˙/¥) to set the minute
3
value, and press the TIME SET button.
"Off time" appears on the display, and the "hour" value
blinks.
Repeat step
4
"Source select" appears on the display.
Press the scroll buttons (˙/¥) to select the
5
source, and press the ENTER button.
Now the timer setting is stored in memory.
and to set the Off time.
2 3
37