Setting The Timer; Using The Timer - Teac CR-H238i Manual Del Usuario

Setting the Timer

< The unit can be programmed to turn on and off at
specified times.
< Adjust the clock before setting the timer.
< When no action is taken for 20 seconds, the timer
setting mode will be cancelled.
1 Press the TIME MODE button.
The hour value of the start time blinks.
Press the Scroll buttons (° / ‡) to set the hour
2
of the start time and press the ENTER button.
The minute value of the start time blinks.
Press the Scroll buttons (° / ‡) to set the minute
3
of the start time and press the ENTER button.
The hour value of the stop time blinks.

Using the Timer (1)

Press the Scroll buttons (° / ‡) to set the hour
4
of the stop time and press the ENTER button.
The minute value of the stop time blinks.
Press the Scroll buttons (° / ‡) to set the minute
5
of the stop time and press the ENTER button.
The source name blinks.
Press the Scroll buttons (° / ‡) to set the source
6
and press the ENTER button.
You can select from "TU FM" (TUNER FM), "TU AM"
(TUNER AM), "CD", "USB", "SD" or "iPod".
The volume level blinks.
37