Safety; Intended Use; Personnel Qualification; Skilled Personnel - WIKA TR Serie Manual De Instrucciones

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
thermometer has been selected in terms of measuring range, design and specific
measuring conditions.
Choose the thermowell with regard to the maximum pressure and temperature (e.g.
table of contact ratings in DIN 43772).
Non-observance can result in serious injury and/or damage to equipment.
Further important safety instructions can be found in the individual chapters of these
operating instructions.

2.1 Intended use

These resistance thermometers and thermocouples are used for temperature measurement in
industrial applications.
The instrument has been designed and built solely for the intended use described here, and may
only be used accordingly.
The technical specifications contained in these operating instructions must be observed. Improper
handling or operation of the instrument outside of its technical specifications requires the
instrument to be shut down immediately and inspected by an authorised WIKA service engineer.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in the instrument malfunctioning. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by
■
skilled personnel who have the qualifications described below.
Keep unqualified personnel away from hazardous areas.
■

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge of
country-specific regulations, current standards and directives, are capable of carrying out the
work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
WIKA operating instructions resistance thermometers, thermocouples
GB
5