LD Systems LDCURV500IAMP Manual De Usuario página 8

Load a single global preset onto the device (Upload Single Global Preset File to Device)
To load a single global preset onto the CURV 500 IAMP, highlight the required memory slot in the list of global presets (1 click) and click
on the button "Upload Selected Global Preset File". In the next window, "Upload Single Global Preset to Device", click on "Yes", select the
desired file on your computer and click on "Open". The progress of the upload process will now be displayed as a percentage and, as soon
as the process is completed, the global preset just loaded will appear in the window "List of Global Presets".
Reset global preset to factory setting (Reset Global Preset)
To restore a global preset in the CURV 500 IAMP to its factory setting, select the desired preset in the window "List of Global Presets" by
highlighting it (1 click) and then clicking on the button "Reset Global Preset". Once the process is complete, the original preset name will be
replaced by "DEFAULT".
8