Operating Elements And Connections - IMG STAGELINE LED-640RGBW Manual De Instrucciones

Contents
GB
1

Operating Elements and Connections . 12

1.1 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.2 Remote controller LC-3 . . . . . . . . . . . . . . . 13
2 Safety Notes . . . . . . . . . . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . . . . . . . . . 13
4 Setting the Light Effect Unit
into Operation . . . . . . . . . . . . . . . . . . . . . 14
4.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2 Power supply . . . . . . . . . . . . . . . . . . . . . . . 14
4.3 Basic settings . . . . . . . . . . . . . . . . . . . . . . 14
5 Operation without DMX controller . . . . . 15
5.1 Activating / deactivating the music control
Adjusting the microphone sensitivity . . . . . 15
5.2 Selecting a show program . . . . . . . . . . . . . 15
5.3 Selecting a colour or a colour combination 15
5.4 Interconnecting several LED-640RGBW . . 15
5.5 Remote control via LC-3 or LC-9RTX . . . . 16
6 Operation via DMX light controller . . . . 16
6.1 DMX connection . . . . . . . . . . . . . . . . . . . . 16
6.2 Setting the DMX start address . . . . . . . . . 17
7 Additional Functions . . . . . . . . . . . . . . . 17
7.1 Test program . . . . . . . . . . . . . . . . . . . . . . . 17
7.2 Indication of operating hours
and firmware version . . . . . . . . . . . . . . . . . 17
8 Cleaning the Unit . . . . . . . . . . . . . . . . . . . 17
9 Specifications . . . . . . . . . . . . . . . . . . . . . 17
9.1 Menu structure . . . . . . . . . . . . . . . . . . . . . 18
9.2 DMX functions and values . . . . . . . . . . . . 19
12
All operating elements and connections de -
scribed can be found on page 2.
1 Operating Elements
and Connections
1.1 Rear panel
1 Mounting bracket
2 Locking screws for the mounting bracket (1)
3 LED DMX; lights up when receiving a DMX con-
trol signal
4 LED MASTER lights up in the master mode
(operating without DMX controller or with the
remote controller LC-3 or LC-9RTX)
5 Display
6 LED SOUND; flashes during control via the
microphone (11) in case of acoustic pulses
7 LED SLAVE; lights up when the unit operates in
the slave mode
8 Operating buttons
Button MENU to call the adjusting menu and to
select the menu items, if pressed for a longer
time, to exit the menu
Buttons and
Button ENTER to call a menu item and to mem-
orize a setting
9 Jack to connect the receiver of the wireless
remote controller LC-9RTX (optional)
10 Jack to connect the cable remote control LC-3
(optional)
11 Microphone for music control
12 DMX signal input (3-pole, XLR) to connect a
light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
13 DMX signal output (3-pole, XLR) for connection
to the DMX input of another DMX light effect
unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+
14 Ring screw to fix a safety rope
15 Mains output jack OUTPUT to connect another
light effect unit
16 Mains jack for connection to a socket (230 V~ /
50 Hz) via the mains cable provided or for con-
nection to the mains output jack (15) of another
LED-640RGBW
17 Support for the mains fuse
Always replace a blown fuse by one of the same
type!
to change a menu setting