Operating Elements And Connections; Applications - IMG STAGELINE FXBAR-5SET Manual De Instrucciones

8
10 11 7
MIC IR
9
MIC IR
4
Arrangement of spotlights and derby lights: The figure above shows the
factory settings for the arrangement of the lights
their connections to the jacks
connection can be changed as desired . The controller will automatically recognize
which spotlight/derby light has been connected to which jack and will send the
control signals to the corresponding jacks .
Contents
1 Operating Elements and Connections 12
2 Applications . . . . . . . . . . . . . . .12
3 Safety Notes . . . . . . . . . . . . . . .13
3 .1 Special safety notes for the laser unit . . . .13
3 .2 General safety notes . . . . . . . . . . . .13
4 Before Operation . . . . . . . . . . . .13
4 .1 Operation with a stand . . . . . . . . . . .13
4 .2 Fixed installation . . . . . . . . . . . . . .13
4 .3 Aligning the spotlights/derby lights
and the laser unit . . . . . . . . . . . . .13
4 .4 Power supply . . . . . . . . . . . . . . . .13
4 .5 Wireless footswitch . . . . . . . . . . . .13
4 .5 .1 Conformity and approval . . . . . . . . .13
5 Operation . . . . . . . . . . . . . . . .14
5 .1 Independent operation . . . . . . . . . . .14
5 .1 .1 IR remote control . . . . . . . . . . . . .15
5 .1 .2 Wireless footswitch . . . . . . . . . . . .15
5 .2 Master / slave mode . . . . . . . . . . . . .16
5 .3 Operation with a DMX controller . . . . . .16
5 .3 .1 Connection . . . . . . . . . . . . . . . .16
5 .3 .2 Activating the DMX mode . . . . . . . .16
5 .3 .3 Changing the start address
and the number of DMX channels . . . .16
5 .3 .4 DMX functions . . . . . . . . . . . . . .16
6 System Settings . . . . . . . . . . . . .18
6 .1 Spotlight / Derby light configuration
for DMX mode with 27 channels . . . . . .18
6 .2 Disabling the wireless footswitch . . . . . .18
6 .3 Reset . . . . . . . . . . . . . . . . . . .18
6 .4 Test . . . . . . . . . . . . . . . . . . . .18
6 .5 Auto-off feature for display backlight . . . .19
7 Cleaning . . . . . . . . . . . . . . . . .19
8 Specifications . . . . . . . . . . . . . .19
12
POWER
LINK
POWER LINK 230 V~/50 Hz
1 2
12
10
4 3
1 ... 4 at the controller and
... . However, the order of arrangement and
1 4
Light Effect Set
These instructions are intended for installers
of the set and for users with basic knowledge
in DMX control . Please read the instructions
carefully prior to operation and keep them
for later reference .
1 Operating Elements
and Connections
1 Connection POWER LINK for power sup-
ply of a second unit
2 Mains jack for connection to a socket
(230 V/ 50 Hz) via the mains cable provided
The support for the mains fuse is on the
right of this jack . Always replace a blown
fuse by one of the same type!
3 XLR jack DMX OUT: DMX signal output for
connection to the DMX input of a second
DMX-controlled unit
4 XLR chassis plug DMX IN: DMX signal
input for connection to a light controller
or to the DMX signal output of a second
DMX-controlled unit
5 Control MICROPHONE SENSITIVITY; to
adjust the microphone sensitivity for mu-
sic-controlled light effects
6 Display and control buttons; to select the
operating mode and to make settings,
refer to the menu structure on page 14
7 IR sensors (2 ×) for the infrared signals of
the IR remote control
8 Two brackets for fixed installation
9 Mounting screws for the brackets (8)
10 Four strobe LEDs
DMX OUT
230 V~/
50 Hz
FUSE
DMX OUT DMX IN
3
13
15
3 2
DMX IN
MICROPHONE
SENSIVITY
MICROPHONE SENSITIVITY
4 5
14
10
2
11 Microphone for music-controlled light
effects
12 Antenna for the signals of the wireless
footswitch
13 Laser aperture
14 Eyebolt; to attach a safety rope
15 Stand sleeve for installing the set on a
stand

2 Applications

The set FXBAR-5SET consists of two flat LED
spotlights, two LED derby lights, one laser
unit and four strobe LEDs . It is used for ef-
fect illumination, e . g . on stage, in clubs and
function rooms .
With a DMX light controller, the FXBAR-
5SET can be controlled via 3, 5, 9 or 27 DMX
channels according to the desired functions .
For independent operation, two remote con-
trols are provided (wireless footswitch and
IR remote control) . Various light show pro-
grams are available which can be music-
controlled via the integrated microphone .
Multiple FXBAR-5SET can be interconnected
and synchronized in master/slave mode .
The following accessories are supplied
with the set: A stand and two transport bags
for mobile operation and two mounting
brackets for fixed installation .
FXBAR-5SET
IR
MENU ENTER
MENU ENTER IR
6 7
8
10
9
1
1