Storage; Troubleshooting - Silvercrest SMW 800 C3 Instrucciones De Uso

■ Remove splashes or soiling. Clean the door,
both sides of the viewing window, door seals
and adjacent components with a damp cloth.
Do not use abrasive cleaning agents.
■ If condensation accumulates on or around the
outside of the door, wipe it off with a soft cloth.
This can happen if the microwave is operated in
extremely humid conditions.
■ Clean the glass plate
clean the glass plate
hot water with a little washing-up liquid.
GB
■ Wipe the rotator assembly
MT
cloth.
■ Clean the grill stand
dry it well.
■ Remove odours regularly. Put a deep microwave
bowl with a cup of water, juice and peel of a
lemon into the microwave. Heat for 5 minutes.
Wipe off thoroughly and rub dry with a soft
cloth.
■ If the bulb in the microwave needs replacing,
arrange for it to be exchanged by a dealer or
consult our Service Department.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry place.

Troubleshooting

There is nothing on the display
■ The plug is not inserted into a mains power
socket. Check the plug.
■ The mains power socket is defective. Try another
mains power socket.
■ The display
Service.
86
regularly. You can also
in the dishwasher or in
off with a damp
in hot dishwater and
.
is defective. Contact Customer
The appliance does not respond to pressing
the buttons.
■ The Child lock is activated. Deactivate the Child
lock (see chapter "Operation").
The appliance does not start the cooking/
heating process.
■ The door is not properly closed. Close the door
properly.
■ The plug is not inserted into a mains power
socket. Connect the plug to the power supply.
The glass plate makes a loud noise when
turning.
■ The glass plate is not correctly positioned
on the rotator assembly
plate on the rotator
assembly .
■ The rotator assembly
cooking chamber are dirty. Clean the rotator
assembly and the floor of the cooking area.
. Centre the glass
and/or the floor of the
SMW 800 C3