Description; Technical Data - SKF TMHP 15 Instrucciones De Uso

1. Description

The SKF self-centring hydraulic pullers are specially
designed for extracting large bearings and other
components. To attain the high forces that
then normally are needed, these pullers are
equipped with a hydraulic jack and supplied with
SKF hydraulic pump TMJL 100.

2. Technical data

Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight
Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight
Description
No. of arms
Width of grip
Effective arm length
Claw length
Claw height
Piston displacement
Max. pressure
Max. force
Weight
4 EN
TMHP 15/260
3
195–386 mm (7.7–15.2 in)
264 mm (10.4 in)
37 mm (1.5 in)
30 mm (1.2 in)
100 mm (3.9 in)
80 MPa (11 600 psi)
150 kN (17 US ton)
34 kg (75 lb)
TMHP 30/170
3
290–500 mm (11.4–19.7 in)
170 mm (6.7 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
45 kg (99 lb)
TMHP 50/140
3
310–506 mm (12.2–19.9 in)
140 mm (5.5 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
47 kg (104 lb)
TMHP 30/350
3
290–500 mm (11.4–19.7 in)
350 mm (13.7 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
47 kg (104 lb)
TMHP 50/320
3
310–506 mm (12.2–19.9 in)
320 mm (12.6 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
54 kg (119 lb)
TMHP 30/600
3
290–500 mm (11.4–19.7 in)
600 mm (23.6 in)
30 mm (1.2 in)
35 mm (1.4 in)
50 mm (2.0 in)
80 MPa (11 600 psi)
300 kN (34 US ton)
56 kg (123 lb)
TMHP 50/570
3
310–506 mm (12.2–19.9 in)
570 mm (22.4 in)
32 mm (1.2 in)
40 mm (1.6 in)
40 mm (1.6 in)
80 MPa (11 600 psi)
500 kN (56 US ton)
56 kg (123 lb)