Application; Description; General Description; Contents List - SKF THKI 300 Instrucciones De Uso

1. Application

The SKF Oil Injection Sets THKI 300 and THKI 400 are intended for the mounting and
dismounting of pressure joints, such as couplings, gears, pulleys, flywheels and SKF OK
couplings, where the surface pressure is less than 250 N/mm

2. Description

2.1 General description

The SKF Oil Injection Sets THKI 300 and THKI 400 consist of a ready to use oil injector
assembly, connection nipples and accessories. The design allows oil to be automatically
returned to the reservoir, once the pressure is released, minimizing the risk of oil leakage.
The sets consist of the following items.

2.2 Contents list

The THKI's are supplied with the following accessories:
Description
Pressure gauge
High pressure pipe
Connection nipple
Connection nipple
Connection nipple
Mounting fluid (I litre)
Carry case

2.3 Technical data

Injection Set
Maximum pressure
Volume per stroke
Oil reservoir capacity
Weight
Pressure gauge
Diameter
Accuracy
SKF THKI 300 / THKI 400
THKI 300
1077589
227957 A
1016402 E
1014357 A
228027 E
LHMF 300/1
728245/3 A
THKI 300
300 MPa (43 500 psi.)
0,23 cm (0.014 in )
3 3
200 cm (12.2 in )
3 3
7 kg (16 lbs)
1077589
100 mm (4 in.)
1% of full scale
(350 N/mm for THKI 400).
2 2
THKI 400
1077589/3
227957 A/400MP
1016402 E
-
228027 E
LHMF 300/1
728245/3 A
THKI 400
400 MPa (58 000 psi.)
0,23 cm (0.014 in )
3 3
200 cm (12.2 in )
3 3
7 kg (16 lbs)
1077589/3
100 mm (4 in.)
1% of full scale
5