Construction And Function; Construction; Function - Balluff BML SL1-ALZ1-B0ZZ-ABA1-S284/KA Manual De Instrucciones

BML SL1-ALZ1- _ _ ZZ -ABA _ - S284/KA _ _
Absolute magnetic encoder system
3

Construction and function

3.1

Construction

BML SL1-...-S284/-S4
LED
BML SL1-...-KA_ _
Fig. 3-1: BML SL1-..., construction
Active measuring surface
Ballu JJWW .xxDE Abs Code L
Fig. 3-2: BML SL1-..., active surface and orientation
3.2

Function

The BML is a magnetically coded, non-contact, absolute
measuring system consisting of a sensor head (BML SL1)
and a magnetic tape (BML TSC). The position is
determined based on rugged, two-track coding.
A continuous plausibility check is used to detect measuring
errors. The status of the sensor head is indicated by an
LED (Section 5.2 on page 16). Optional status
monitoring detects the signal quality for evaluating the
excess gain.
Absolute position output is via BiSS C/SSI (Section 6).
These interfaces can also be used to call up diagnostic
data and configuration data.
In addition a low-delay output through an incremental sin/
cos interface (Section 7) is possible especially for feedback
loop tasks.
www.balluff.com
12.3 54.6
Sensor head
(2x) Ø 4.3
2
Sensor head
Left
Right
25 10.6
Active measuring surface
Ballu JJWW ._ _DE Abs Code L
Magnetic tape
BML SL1-...-S284
16 +0.2
BML SL1-...-S4
16 +0.2
Ballu
english 7