Kärcher BR 750 BAT Manual De Instrucciones página 37

English
Information:
i
Do not use detergents which foam
vigorously.
Open the cover.
Fill with fresh water (maximum 60 °C) up
to the lower edge of the filler inlet
Add detergent.
Comply with the metering information.
Close the cover.
Recommended detergents
Application:
Maintenance cleaning
(also for alkaline-sensitive
floors)
Cleaning greasy dirt
deposits
Basic cleaning
(stripping) alkaline-
resistant hard floor
coverings
Basic cleaning
stripping linoleum
Sanitary cleaner
Disinfectant cleaner
Detergents are available from specialist
outlets.
Detergent
RM 745
RM 746
RM 69 ES ASF
RM 69 ASF
RM 752
RM 754
RM 25 ASF
RM 732
Setting the water flow rate
BR 750
Turn the info button clockwise until
"Wasser:..." or "Water:..." is displayed.
Shortly press the info button - display
blinks.
Set the water quantity by turning the info
button. The number of black bars indica-
tes the water quantity.
Press the info button to confirm the set
value.
BD 750
Set the water flow rate using the water
quantity buttons (+, -) according to the
dirt on the floor covering.
Information: If the water quantity is
i
set to "0", then the water pump swit-
ches off automatically
Switch on/off water supply
Switch on and off with the buttons (+, -).
Information:
i
Start cleaning on a low water flow
rate. Gradually increase the water flow rate
until the desired cleaning result is obtained.
Lowering the suction bar
Press down the lever; the suction bar is
lowered and the suction turbine is
switched on.
Operating Instructions
37