Remaining Risk Factors - HOLZMANN MASCHINEN KAP 305JL Manual De Instrucciones

12.3

Remaining risk factors

Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
Despite of correct and proper use and maintenance there remain some residual risk factors:
 Risk of injury to the hands / fingers by the rotating tool during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a
suitable tool / device workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contact with live electrical components.
 Risk of injury due to breakage or cracking of the abrasive
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury to the hearing by prolonged labor without hearing protection.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
HOLZMANN Maschinen GmbH
KAP 305JL
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest
attention is required. A safe working depends on you!
This machine produces an electromagnetic field during operation. This
field may under some circumstances interfere with active or passive
medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician
and the medical implant manufacturer before operating this machine!
www.holzmann-maschinen.at
W A R N I N G
W A R N I N G
SAFETY
39