Security Instructions - HOLZMANN MASCHINEN KAP 305JL Manual De Instrucciones

12.2

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
Read the manual carefully and get familiar with all components before operating
the machine for the first time.
This manual contains important information for correct operation of the machine.
This manual is part of the machine and shall be stored for later reference. Add this
manual to the machine if handed to 3rd persons for use.
Stick to these Security Warnings and Instructions to reduce the risk of serious
injuries.
Assure that the working area is sufficiently lighted!
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely and keep balance
at all times.
Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
Each time you work with an electrically operated machine, caution is advised!
There is a risk of electric shock, fire, cutting injury.
Avoid body contact with earthed
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)
Check the cable regularly for damage
When working with the machine outdoors, use extension cables suitable for
outdoor use
Do not use the cable to carry the machine or to fix the work piece
Do not overload the machine
You will work better and safer at specified power range.
Use the correct power tool
Do not use low-power machines for heavy work.
Do not use the power tool for such purposes for which it was not designed. For
example do not use hand circular saw for cutting tree limbs or logs.
HOLZMANN Maschinen GmbH
KAP 305JL
www.holzmann-maschinen.at
SAFETY
36