Trouble Shooting - HOLZMANN MASCHINEN KAP 305JL Manual De Instrucciones

16

TROUBLE SHOOTING

BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
Engine doesn't run
(or not correctly)
Saw blade gets stucked
Material kickback
Wrong cutting angle
Wrong mitre angle
Saw blade touches the
machine bed
MANY POTENTIAL
CONNECTION TO THE ELECTRICITY GRID.
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.
HOLZMANN Maschinen GmbH
KAP 305JL
Possible cause
 Switch defective
 Power supply is off
 Carbon brushes defective
 Motor defective
 Blunt saw blade
 Too hard materal or too
much pressure
 Blunt saw blade
 Wrong running direction
of the saw blade
 Wrong adjusted fence or
saw aggregate
 Adjusting the cutting
depth wrong
SOURCES OF ERROR
www.holzmann-maschinen.at
Solution
CAN BE CLEARED
N O T I C E
TROUBLE SHOOTING
 Repair switch
 Repair power supply
 Chang carbon brushes
 Repair or change
motor
 Sharpening or
changing
 Conform the cutting
speed on work piece
hardness and engine
power
 Sharpening or
changing
 Control
 Control
 Control
BY THE EXPERTLY
48