12
SAFETY
12.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for: cutting wood and plastic materials.
Any manipulation of the machine or its parts is a misuse, in this case
MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect
damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
DO NOT USE THE MITRE SAW FOR CUTTING FIREWOOD!
Do not operate the machine outside the stated technical restrictions laid down in this
manual.
Do not operate the saw without security devices.
Do not dismount the saw blade protection.
Do not use the machine for cutting any other material than wood and wood composite
products and plastic.
Do not manipulate the machine.
HOLZMANN Maschinen GmbH
KAP 305JL
Use only saw blades allowable for this machine!
Never use a damaged saw blades!
Use the machine never with defective or without mounted guard!
The removal or modification of the safety components may result
in damage to equipment and serious injury!
www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
HOLZMANN-
35