Working Ranges, Angles, Distances, Tolerances And Measuring Accuracy - Balluff BML SF2-I2 -A- Z 5-KA Serie Manual De Instrucciones

BML SF2-I2 _ _ -A/QZ _ _ - Z _ _ 5-...
Incremental magnetic encoder system
4
Installation and connection (continued)
4.4.1 Working ranges, angles, distances, tolerances
and measuring accuracy
Distances and tolerances for linear and rotary applications.
For optimum measurement behavior, make sure
to maintain the free area of magnetizable
material.
The diameter of body of rotation must not fall
below the 30 mm minimum.
BML SF2-_ _ _ 1-...
–Roll +Roll
5
−X
Incremental sensor
Reference sensor
Free area of magnetizable material
Forward direction of approach with sensor head movement in the
1)
direction of arrow, signal sequence: A before B
Fig. 4-5: Distances and tolerances of BML SF2-_ _ _ 1-...
www.balluff.com
+Yaw
–Yaw
+X
1)
–Pitch
10
Z
+Pitch
BML SF2-_ _ _ 2-...
+Yaw
3
+Pitch
+X
Incremental sensor
Reference sensor
Free area of magnetizable material
Forward direction of approach with sensor head movement in the
1)
direction of arrow, signal sequence: A before B
Fig. 4-6: Distances and tolerances of BML SF2-_ _ _ 2-...
–Yaw
1)
13
–Roll
Z
+Roll
–Pitch
1)
5
−X
english 13