The Pattern Selector; Removing The Bobbin Case And Bobbin - EURO-PRO 473 Manual De Instrucciones

THE PATTERN SELECTOR

The desired pattern can be selected by turning the pattern selector dial. The marks in the stitch display correspond
to the patterns shown on the panel respectively, as follows:
A ( ) straight stitch, middle needle position
B ( ) straight stitch, left needle position
C ( ) zigzag stitch with variable width
D ( ) tricot stitch
E ( ) stretch blind stitch
F ( ) double action stitch
G ( ) reverse blind stitch
automatic buttonhole sewing
THE PATTERN SELECTOR ( Model 473/373/372/372H)
( )
1 - 3 straight stitch
( )
zigzag stitch
4-6
7
( )
triple zigzag stretch stitch
8
( )
triple straight stretch stitch
9 ( )
overlock stitch
10
( )
smocking stitch
( )
11
tricot stitch
12
( )
shell stitch
( )
automatic buttonhole sewing
RE MOVING THE BOBBIN CASE AND BOBBIN
1. Raise the presser foot and turn the balance wheel towards
you until the thread takd-up lever is at its highest position.
2. Open the shuttle cover.
3. Open hinged latch of bobbin case and pull bobbin case out of
machine.
Release the latch and the bobbin will fall out. As long as you
hold the bobbin case latch open, the bobbin cannot drop
out.
( Model 374)
8
Open