Printer Test; Maintenance - Mettler Toledo RS-P26 Manual De Instrucciones

Example for setting the day:
RS-P26 Balance Display
F
* NENU
Menu
* rESEt
F
* dAY 18
Menu
* dAY 21
F
* StorEd
Menu

5 Printer test

The RS-P26 is equipped with a self-test that automatically prints out the character set of the printer.
(standard IBM/DOS).
Starting the test
Terminating the test

6 Maintenance

Under normal conditions the RS-P26 requires practically no maintenance. The METTLER TOLEDO
service department is available if servicing is required. Please ask your responsible METTLER
TOLEDO dealer for details.
Open the menu:
➞ Hold down the «F» key until "reset" appears.
(Print out: --- See Balance Display ---)
➞ Select the menu option "Day" with the «F» key.
➞ Select the "Day" – scroll up with the «h» key.
Save the settings:
➞ Hold down the «F» key until "Stored" appears.
➞ Press the key «h» and power on the RS-P26.
The printer prints out the character set
➞ Power off the RS-P26
– scroll down with the «
RS-P26 Printer
9
3
» key.
¿