Serial Numbers; Introduction - Altrad BELLE MAXI 140 Manual Del Operador

GB
The engines installed in the Belle Maxi 140 range of mixers carry a 12 month warranty. Any problems encountered with the engine,
during the warranty period should be dealt with by the relevant approved engine dealer, nearest to yourself.
If you require the name of your nearest approved engine dealer, a full listing is available on request from Belle.

Serial Numbers

ATTENTION! Make a note of the serial numbers of your machine and always quote them in any communication with a
Belle Group Dealer.
MACHINE SERIAL NUMBER
GB
Congratulations on the purchase of this quality concrete mixer from the Belle Group range.
This machine is manufactured to conform to the EEC directives currently in force and is
issued with a declaration of conformity and therefore displays the CE mark, applicable in territories where they are enforced.
Read this manual carefully, observing all operating and safety instructions before, during and after using your machine. Maintain your
machine in good working order.
When maintaining this machine only the manufacturer's original spare parts may be
used. The user will lose any possible claims if replacement parts used are other than the makers original spare parts.
Retain this manual with your machine for future reference.
SAFETY AND ACCIDENT PROTECTION
Operating Instructions :
All persons who apply, assemble, operate, start, control, maintain or repair this machine must read and understand these operating
instructions.
Owner Responsibility :
The owner must ensure that only quali ed persons operate, maintain, or repair this machine.
Storage :
When not in use, store in a dry, locked place. Keep away from children.
Operation for the Intended Purpose :
Mixers are intended for the production of concrete, mortar and plaster. The mixer must be used for its intended purposes and is not
suitable for the mixing of ammable or explosive substances. The mixers must not be used in an explosive atmosphere.
MAINTENANCE AND REPAIRS
Only authorised dealers should repair the mixer, and within the requirements of the CE mark (where applicable), where no deviation to
the original speci cation must take place.
WARNING
REPLACEMENT PARTS
Contact your nearest Belle Group dealer. When ordering replacement parts, please quote the product type, serial number & engine/
motor model. Detail the part required in conjunction with the parts list provided, indicating the Page Number, Item Number and
quantity required.
Serial Numbers
Any maintenance and repairs carried out, to any of the electric motors components must be undertaken
by a quali ed electrician.
ENGINE / MOTOR SERIAL NUMBER

Introduction

6