Deleting Results; Adjustment (Cal); Adjusting The Measuring Cell With Water - Mettler Toledo Densito 30PX Instrucciones De Manejo

To print or transfer all results manually
- Press and hold the
pears in the display.
- Press the ok/meas. key.
The symbol in the display flashes and all results are transferred.
After a successful transfer, the user is asked whether he/she would like to delete
the transferred results:
Leaving transferred results in tact
- Confirm Memory All Clear
button.
Deleting transferred results
- Press the or
Execute? (
Yes
- Press the ok/meas. key to confirm.
All results are deleted.
6.8

Deleting results

It is not possible to delete individual results with the Densito 30PX.
Deleting all results
- Press and hold the
appears in the display.
- Press the or
Execute? (
Yes
- Press the ok/meas. key to confirm.
All results are deleted.
7

Adjustment (cal)

Before adjusting
- Carry out a test measurement before adjusting the measuring cell, see Chap. 4.3.
Test measurement result < 0.9995 or > 1.0005
- Check if the measuring cell is dirty, clean if necessary and repeat the test
measurement.
Test measurement result once again < 0.9995 or > 1.0005
- Readjust instrument.
7.1

Adjusting the measuring cell with water

Settings in the menu
- Calib. Mode:
Adjusting
- Ensure that the measuring cell and sample tube are clean.
- Fill the clean measuring cell with the accompanying density standard or dis-
tilled water and ensure that no air bubbles are allowed to enter.
- Press and hold the
The instrument adjusts automatically (duration: approx. 1 minute). After adjust-
ment is completed, the measured deviation from the theoretical value and
Execute? (
No
METTLER TOLEDO Densito 30PX
key until
Memory All Clear
key.
) appears.
Memory All Clear
key until
key.
) appears.
off
key until
CALIB (Water)
) appears.
Measurement (meas) / Adjustment (cal)
Memory out , Execute? (
Execute? (
Execute? (
No
All
).
No
) by pressing the ok/meas.
Execute? (
appears in the display.
) ap-
)
No
17