Technical Specifications - Luxibel LX106 Manual Del Usuario

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Unscrew the fuse holder on the rear panel of the base with an appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing and tighten it.
9.

Technical Specifications

power supply
power consumption
DMX connection
light source
beam angle
luminous flux
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 05 – 15/05/2013
LX106/LX107
LX106
240 VAC 50 Hz
75 W
3-pin XLR
12 x high-power 10 W RGBW LEDs
17°
18000 lm @ 1 m
295 x 255 x 100 mm
3.5 kg
LX107
240 VAC 50 Hz
120 W
3-pin XLR
18 x high-power 10 W RGBW LEDs
17°
20000 lm @ 1 m
335 x 310 x 110 mm
5 kg
9 ©Velleman nv