Care And Maintenance; Removing The Cover - Britax Pavilion 70-G3 Guia Del Usuario

Care and Maintenance

Removing the Cover

WARNING!
Never remove the buckle tongues from the harness.
They cannot be reattached after removal. If reassembled
incorrectly, the child seat may not perform as intended
Loosen the harness.
1
a Lift the harness adjuster lever
located under the cover flap.
b Grasp the chest clip and pull
outward to loosen the harness.
* Connect the chest clip for easier
adjustment.
Open the chest clip.
2
a Press tabs
b Pull apart
Unbuckle the harness.
3
Remove the infant body pillow
4
if necessary.
Remove the belly pad and
5
buckle.
a Lift the cover from the seat to find
the buckle strap connection.
b Remove the buckle strap by
turning the buckle retainer
sideways and routing it out of the
front buckle slot in the child seat.
c Slide the end of the belly pad out
from under the foam pad on the
seat.
d Pull the end of the belly pad and
buckle retainer out of the buckle
slot in the cover to remove.
34
.
1 b
1 a
2b
2a
5a
5b
5c
5d
e Turn the buckle retainer sideways
and slide the buckle out of the
belly pad.
Detach the hook and loop
6
fasteners on the head restraint
cover from around the
harness.
Raise the harness to the
7
highest position and detach
the elastic straps from the
tabs and the hook and loop
fastener from behind the
harness height adjuster.
Remove the head restraint
8
cover.
Detach the plastic hooks from
9
the bottom edge of the child
seat.
Adjust the harness to the
10
lowest position.
Detach the plastic hooks from
11
the back of the child seat
shell.
Remove the cover from the
12
shell.
Care and Maintenance
5e
6
7
9
11
12
35