Toto CT970CEMFG Manual De Instrucciones página 4

6) Install the toilet unit by aligning carefully with the Modular Rough-In. Slide the
toilet unit into the modular rough-in until the back of the unit is against the wall
(See Ill.7)
7) Before installing the side screws to the mounting blocks to secure the bowl
unit, install the top unit according to the top unit instructions provided. Once top
unit installation is complete, make sure the power cord and water supply hose is
accessible for connection. Have the power cord and supply hose on the side for
easy reach.
8) Install the side screws to the mounting blocks to secure the toilet unit. Cover the
screw head with the provided screw-cap. (see Ill.8)
IMPORTANT: If the side screw does not engage the mounting blocks,
then either the toilet bowl is not fully inserted in the socket or the mount-
ing block is not installed properly. If the toilet is not installed properly, it
CAUTION
may slide out of socket or leak. Please ensure that both sides are properly
fitted and secure. Be sure not to over-tighten the screws, as it may results
in product damage.
9) Place the side panels by aligning the velcro tape accordingly and press firmly. (see Ill.9)
Installation Procedure (continued)
4
Ill. 7
Ill. 8
Ill. 9
Ill. 8