Sauder 417586 Manual De Instalación página 45

Step 35
Optional Hidden Wireless Qi Compatibile Charger by Eggtronic (sold separately)
Insert the HIDDEN WIRELESS Qi COMPATIBLE CHARGER
å
by EGGTRONIC into the large hole in the TOP (H3).
Use the two SCREWS included with the CHARGER to secure
å
the CHARGER into the TOP (H3). Feed the charging cord
out through the hole in the BACK.
NOTE: There are no pre-drilled holes in the hole in the TOP
å
for the CHARGER. The sides of the CHARGER will expand
into the sides of the large hole as you tighten the SCREWS.
Turn two CORD CLIPS (4P) into the TOP (H3).
å
NOTE: The CORD CLIPS are used to hold the charging cord
å
against the TOP.
The sides of the CHARGER will
expand into the sides of the large
hole as you tighten the SCREWS.
www.sauder.com/service
• AVOID dropping
• NEVER use in or near water
• DO NOT disassemble
• DO NOT expose to liquids
• DO NOT use with an extension cord
For safest and fastest charge, only use
original or certifi ed cables.
H3
4P
417586
WARNING
Please use the wireless charging port
correctly and safely. Improper use can
cause safety hazards, or damage to your
furniture or household items. Carefully
read the following safety information.
The sides of the CHARGER
will expand into the sides
of the large hole as you
tighten the SCREWS.
Page 45