Sauder 417586 Manual De Instalación página 52

Step 43
NOTE: The KEYBOARD SHELF can be attached to the right side, left side, or the
å
center of your desk. If you want your SHELF on the right, fasten the KEYBOARD
UPRIGHTS (Q2) to the TOPS (G3 and H3). If you want your SHELF in the center,
fasten the KEYBOARD UPRIGHTS (at an angle) to both TOPS (G3 and H3). The
diagram below is showing the option of the SHELF on the left side.
Fasten the KEYBOARD UPRIGHTS (Q2) to the TOP (G3). Tighten four HIDDEN
å
CONNECTORS and use four BLACK 9/16" LARGE HEAD SCREWS (1S) through
the METAL BRACKETS.
BLACK 9/16" LARGE HEAD SCREW
(4 used for the METAL BRACKETS)
Page 52
1S
G3
Q2
The KEYBOARD SHELF
can be fastened to the left
side, center, or right side.
How to use the HIDDEN CONNECTOR
To fasten two parts together using the HIDDEN
CONNECTORS, insert your screwdriver, at an angle,
into the slot in the HIDDEN CONNECTOR. While
pushing the screw into the hole of the adjoining
part, turn the screwdriver clockwise to tighten.
Roller end
417586
H3
www.sauder.com/service