Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3
Step
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D24 and D25).
å
Fasten the DRAWER RIGHT (35DC) and DRAWER LEFT (35DD) to the DRAWER SIDES (D24 and D25). Use four GOLD
å
5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (98K) to the DRAWER FRONT (N). Use two SILVER 5/8" MACHINE SCREWS (15S).
å
Repeat this step for the other small drawer.
å
2
3
98K
Page 8
Roller end
10A
1
D25
SILVER 5/8" MACHINE SCREW
(4 used for the PULLS)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D24
3
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
417586
15S
10A
2
3S
www.sauder.com/service
Roller end
1
Publicidad
