Power Supply; Inserting The Batteries; Battery Indication - Sony WRT-847A Manual De Instrucciones

Power Supply

The transmitter can operate on two LR6 (size AA) alkaline
batteries continuously for about eight hours (at 10 mW RF
power, 25 ºC / 77ºF).

Inserting the batteries

2
1
Turn the grip in the direction of the arrow to open the
battery holder.
1,3
2
Match two batteries to the polarity markings and insert
them into the battery holder.
3
Close the battery holder and lock the grip by turning it
in the opposite direction of the arrow.

Battery indication

When you turn the power on, the battery condition is
indicated by the BATT indication in the LCD display.
1 2
BATT Lights Lights
indication
Battery Good Less than
condition half-charge
Note
The indication may be incorrect if the two batteries are not
new when inserted. If you plan to use the transmitter for a
long period, replace both batteries with new ones at the
same time.
3 4
Flashes Goes off
Almost Completely
exhausted exhausted
7
(GB)