Product Features; Technical Data; Noise/Vibration Information - Bosch PST 18 LI Manual Original

18 | English

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off switch for on/off switch
(2) On/off switch
(3) Battery charge indicator
A)
(4) Battery
(5) Battery release button
A)
(6) Dust extraction hose
(7) Extraction outlet
(8) Saw blade storage compartment
(9) Base plate
(10) Pendulum action adjusting lever
(11) Hood for dust extraction
(12) Guide roller
(13) Base for Cut Control Cut Control

Technical data

Jigsaw
Article number
Stroke rate control
Pendulum action
Rated voltage
No-load stroke rate n
0
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
B)
Recommended batteries
Recommended chargers
A) Limited performance at temperatures <0 °C
B) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power level
92 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-11:
1 609 92A 5D9 | (12.08.2019)
(14) Saw blade
(15) Viewing window for Cut Control Cut Control
(16) Shock protection guard
(17) Saw blade receptacle
(18) Worklight
(19) Handle (insulated gripping surface)
(20) Anti-splinter guard
(21) Guide for parallel guide
(22) Scale for mitre angles
(23) Screw
(24) Cut mark 0°
(25) Cut mark 45°
(26) Locking screw for parallel guide
(27) Parallel guide with circle cutter
(28) Circle cutter centring tip
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
A)
and during storage
Cutting boards with saw blade T144D:
2
a = 8 m/s , K = 1.5 m/s
h,B
cutting sheet metal with saw blade T118A:
2
a = 5 m/s , K = 1.5 m/s
h,M
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
A)
A)
A)
PST 18 LI
3 603 K11 0..
V= 18
−1
min 0 – 2400
mm 20
mm 80
mm 12
mm
° 45
kg 1.9
°C 0 to +35
°C -20 to +50
PBA 18V...W-.
AL 18...
2
,
2
.
Bosch Power Tools
●
●
5