Ndicator Lights - iCES DST4400 Manual Del Usuario

Indicator lights
2.3
Signaling
MODE 1
MODE 2
Warning
MODE 3
Alarm
MODE 4
Diagnostics
KR
KG
MAINS LIVE
GENERATO
R LIVE
ENGINE
RUNNING
LED OFF LED steady ON

Function

The display is showing the pages of "MODE1".

The display is showing the pages of "MODE 2".

There is at least one active warning.

If a warning is active and the display shows a "MODE 2" page, it will flash at a
rate of 75% ON.

Indicates that the display is showing a "MODE 3" page.

Indicates at least one power-off or one lockout condition.
If there is a power-off or a lockout and the display shows a "MODE 3" page, it

will flash 75% ON and 25%. OFF.
 Indicates that the display is showing a "MODE 4" page.
 Indicates that at least one diagnostic code has been received from the engine.
If a diagnostic code is present and the display shows a "MODE 4" page, the

indicator light will flash at a rate of 75% ON.
 The KR is OPEN
 The KR is CLOSED
 Flashing at 25% ON if the KR is open after a closing command.
 Flashing at 75% ON if the KR is closed after an opening command.
During a test run of the engine, the KR indicator light flashes at an ON/OFF rate

of 50%.
The KG is OPEN

 The KG is CLOSED
 Flashing at 25% ON if the KG is open after a closing command.
 Flashing at 75% ON if the KG is closed after an opening command.
During a test run of the engine, the KR indicator light flashes at an ON/OFF rate

of 50%.
 No mains power
 Mains power steadily within the tolerance range
 Flashing (50%) during transition between the previous two states.
Flashes at a rate of 25% ON after an inhibition command if there is no mains

power,
 otherwise it flashes at 75% ON.
 Generator voltage and frequency are not present.
Generator voltage and frequency are present and steadily within the tolerance

range.
 Flashing (50%) during transition between the previous two states.
 The engine is idle
 The engine is running
 Cooling phase
LED flashing
 
User's Manual DST4400
7