General Information - Hilti DC-EX 230/9 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
DC-EX 230/ 9" cutting guard
It is essential that the operating instructions
are read before the appliance is operated for
the first time.
Always keep these operating instructions to-
gether with the appliance.
Ensure that the operating instructions are
with the appliance when it is given to other
persons.
Contents

1 General information

2 Description
3 Accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Disposal
10 Manufacturer's warranty
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DC EX-230/9 " cut-
ting guard in conjunction with the DAG 230-D, DCG -DB
or DCG 230-D angle grinder.
Operating controls and parts 1
Connector
@
Guard upper section
Page
;
Guard lower section / extension
9
=
Wheel
10
%
Direction-of-rotation arrow
11
&
Guide carriage
11
(
Locking mechanism, depth gauge
11
)
Spacing flange
13
+
14
14
15
15
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Obligation signs
Wear eye
protection.
Wear ear Wear
protection protective
gloves
en
Wear
breathing
protection.
9