General Information; Safety Notices And Their Meaning - Hilti PP 10 Manual De Instrucciones

1. General information

1.1 Safety notices and their meaning

DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
en
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Symbols
Read the Return waste
operating material for
instructions recycling.
before use.
On the tool
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
675-695nm < 5mW max.
CLASS IIIa LASER PRODUCT
Do not stare into the beam.
Laser warning plates for the USA in accordance with
CFR 21 § 1040 (FDA).
18
Printed: 07.07.2013 | Doc-Nr: PUB / 5070160 / 000 / 00
On the tool
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
520-550nm < 5mW max.
CLASS IIIa LASER PRODUCT
Do not stare into the beam.
Laser warning plates for the USA in accordance with
CFR 21 § 1040 (FDA).
On the tool
3R
Laser warning plate in accordance with IEC825 /
EN60825-1:2003
Type identification plate
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
Made in Japan
Hilti= registered trademark of the Hilti Corporation, Schaan, Liechtenstein
DANGER
LASER RADIATION - AVOID DIRECT
EN 60825-1:2003
EYE EXPOSURE
This Laser Product
complies with 21CFR
620-690nm < 5mW max.
1040 as applicable
CLASS IIIa LASER PRODUCT
Power: 6.0V=nom./250 mA
Item No.: 319781
Date .:
PP 10
PP 10
3R