Typical Applications; Installation; Electrical Connections; Maintenance / Cleaning - Vortice A-E Serie Manual De Instrucciones

ENGLISH
Typical application
Fig. 3÷7;
N.B.
If the appliance is installed at a height of less than 2.5
metres from the floor, it is obligatory to install
protection for moving parts, in the form of a safety
grille and gravity louvre (fig. 5, 6).

Installation

Fig. 8÷17;

Electrical Connections

Single-phase electrical connection (fig.12)
Single-phase models are equipped with an automatic
reset limiter, excluding the model 504 M / 566 M
which is equipped with a termal protector to be
connected in series to a magnetothermal motor
protection .
Three-phase electrical connection (fig.13)
Three-phase models are fitted with thermal protection,
which must be connected
thermomagnetic motor overload cutout.

Maintenance / Cleaning

Fig. 18÷22.
in series to a
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol
of the barred waste bin. This
indicates that, at the end of its
useful life, it must not be disposed
of as domestic waste, but must be
taken to a collection centre for
waste electrical and electronic
equipment, or returned to a
retailer on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the end
of its useful life. Failure to do so may incur the
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related
healthrisks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities
for recycling, processing
compatible disposal either directly or by participating
in collective systems.
NOT FALL WITHIN
and environmentally
THE