Correct Use - Miele SLQL0 Instrucciones De Uso

Ocultar thumbs Ver también para SLQL0:
Tabla de contenido

Publicidad

en - Warning and Safety instructions
Do not attach any adhesive labels to the front of the base station
as this conceals an infrared transmitter. Do not place any items in
front of it.
Do not immerse the robot vacuum cleaner or the parts supplied in
water. Clean all parts with a dry or slightly damp cloth only.
Do not drop the robot vacuum cleaner or any of the accessories
supplied with it. Items that have been dropped or damaged should
not be used for safety reasons.
AUS/NZ: The robot vacuum cleaner must only be supplied at
safety extra low voltage corresponding to the marking on the appli-
ance.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

Correct use

Do not use the robot vacuum cleaner without the dust box, pre-fil-
ter and exhaust filter fitted.
Remove all breakable or lightweight items from the floor and make
sure that the robot vacuum cleaner cannot become entangled in
cords, curtains, fringes, cables or similar.
Animals must be kept away from the robot vacuum cleaner. Do
not allow animals to stand or sit on the robot vacuum cleaner.
Take appropriate measures to prevent the robot vacuum cleaner
falling down large drops, e.g. from galleries or balconies. This can be
done, for instance, by setting up physical barriers.
Do not use the robot vacuum cleaner to vacuum up anything
which has been burning or is still glowing e.g. cigarettes, ashes or
coal, whether glowing or apparently extinguished. Do not use it in
the vicinity of a fireplace.
42

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Scout rx2Scout rx2 home vision

Tabla de contenido