Use; Switching On And Off; Starting Vacuuming - Miele SLQL0 Instrucciones De Uso

en
If you want to alter the time of day, pro-
ceed as described above. Press the
Clock button for three seconds.
Defining the area to be vacuumed
(Fig. 10)
The robot vacuum cleaner is 85 mm
high. Any items under which vacu-
uming is required should have a min-
imum clearance of 87 mm.
You can define any areas which the ro-
bot vacuum cleaner should not have
access to.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for per-
manent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Use

Always observe the robot vacuum
cleaner during the first cleaning ses-
sion in a new environment and after
making changes in your home. This
way you will be able to detect and
remove any problematic obstacles or
section off the relevant areas with
the magnetic strip. You must also
check whether steps and drops in
height are recognised properly.
Your robot vacuum cleaner is equipped
with an integrated WiFi module. You
can view status information or execute
control commands using a mobile
device (tablet PC or smartphone).
50
If you would like to control the robot va-
cuum cleaner using a mobile device,
please read the section "App Scout
RX2".
Operation of the robot vacuum cleaner
via remote control and the display is de-
scribed later in this section.

Switching on and off

 Press the Power button on the re-
mote control or any sensor on the
display.

Starting vacuuming

There are two ways to start vacuuming.
Option 1 (Remote control)
 Press the  button.
Option 2 (Display)
 Press the  sensor.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least five minutes, regard-
less of the size of the surface to be va-
cuumed.