Environmental Protection; Standard Spare Parts; Manufacturer's Declaration Of Ce Conformity - Viking LE 540 Manual De Instrucciones

3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

14. Environmental protection

Scarified material should be
composted and not disposed of
in household waste.
38
The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable recyclable waste can be re-used.
For this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the section "Disposal"
during disposal. ( 4.9)
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.

15. Standard spare parts

Blade set:
6290 007 1000
16. Accessories
Grass catcher box AFK 050:
6910 700 9600
17. Manufacturer's
declaration of CE conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declare under our sole responsibility that
the machine
scarifier, manually operated and mains-
powered (LE),
manufacturer's VIKING
brand
type LE 540
serial number 6290
conforms to the following EC directives:
2000/14/EC, 2002/96/EC, 2006/42/EC,
2011/65/EU, 2014/30/EU, 2014/35/EU
The product has been developed in
conformance with the following standards:
EN 60335-1, EN 50636-2-92
Applicable conformity assessment
procedure:
Appendix V (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
Measured sound power level:
86,0 dB(A)
Guaranteed sound power level:
89 dB(A)
Langkampfen,
2017-01-02 (YYYY-MM-DD)
VIKING GmbH
0478 670 9902 H - EN