Display Interpretations - Rautheon UW50PV Manual De Operation

Operation

Display Interpretations

Program identification code (ROM).
HRWC00
This is an example only.
DONE End of cycle
DOOR Door not locked problem
EMTY Empty problem
FILL Fill problem
SDLY Spin coast delay
NEXT Select cycle or open door or
select program
NCYC Cycle not available
STOP Stop button pressed or cycle ended
A1 Auxiliary output #1
A2 Auxiliary output #2
A3 Signal
CF Cold flush
CH Cold fill to high level
CM Cold fill to medium level
CL Cold fill to low level
CO Cold fill to overflow
CR Cold rinse
CY Cycle number
D1 Drain #1
Da Drain to optional reuse tank A
Db Drain to optional reuse tank B
F Heat select temperature in ° Fahrenheit
C Heat select temperature in ° Centigrade
HF Hot flush
HH Hot fill to high level
HM Hot fill to medium level
aL Fill from reuse tank A to low level
16
Display Interpretations (Continued)
aM Fill from reuse tank A to medium level
aH Fill from reuse tank A to high level
bL Fill from reuse tank B to low level
bM Fill from reuse tank B to medium level
bH Fill from reuse tank B to high level
HL Hot fill to low level
HO Hot fill to overflow
HR Hot rinse
H1 High speed #1
H2 High speed #2
H3 High speed #3
HT Heat (steam or electric)
--M Minutes (used when
programming time)
--S Seconds (used when
programming time)
MS Medium speed spin
SK Soak
S1 Supply #1 (Detergent)
S2 Supply #2 (Bleach)
S3 Supply #3 (Sour)
S4 Supply #4 (Softener)
S5 Supply #5 (Specialty)
TH Controlled temperature fill to
high level
TM Controlled temperature fill to
medium level
TL Controlled temperature fill to low level
TO Controlled temperature overflow
W1 Wash 1 (normal reversing)
W2 Wash 2 (gentle reversing)
F232050