5. Begin timing how long it takes for the wheels to
rotate 10 times.
6. Note how many seconds for 10 rotations. If
the count is within 20 - 25 seconds, flow to
the cleaner is adequate and no adjustment is
necessary.
Adjust flow if necessary:
1. Determine if the flow to the cleaner is adequate
or should be adjusted. If the count is:
• 26 - 50 seconds --- Increase Flow (+)
• 10 - 19 seconds --- Decrease Flow (–)
2. Use the FlowKeeper™ valve setting up or down,
or adjust the valves at the equipment pad to
increase or decrease flow to the cleaner as
necessary (Figure 9).
|
Owner's Manual
Zodiac
®
MX6
Figure 9
ENGLISH
Pool Cleaner
™
Page 7
Increase Flow
+
_
Decrease Flow