WAGNER PAINTEATER Manual Del Propietário página 4

WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Power Tool use and Care
do not force the power tool. use the correct power tool for your application. The correct
•
power tool will do the job better and safer at the rate for which it was designed.
• do not use the power tool if the switch does not turn it of and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
• disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
• use the power tool, accessories and tool bits, etc., in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous
situation.
Service
have your power tool serviced by a qualified repair person using only identical
•
replacement parts. This will ensure that the safety of the power tool is maintained.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending upon how often you do this type of work. To
reduce your exposure to these chemicals: work in a well-ventilated area and work with approved
safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and
•
other contruction activities. Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
use of this tool can generate and/or disburse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSh/OShA approved
respiratory protection appropriate for the dust exposure. direct particles away from
face and body.
4
English
Save all warnings and instructions for future reference.