General Description; Parts And Components; Hand Positions - WAGNER PAINTEATER Manual Del Propietário

General description

The Paint Eater™ is an excellent surface preparation tool when preparing solid wood,
wood siding and masonite siding for paint. do not use Paint Eater™ on textured siding
or shakes.
The Paint Eater™ has been designed to perform a number of tasks associated with
surface preparation. It will remove paint chips and feather the paint edges; it can be used
to remove paint oxides and mildew; and will abrade the painting surface and provide for
excellent paint adhesion. The Paint Eater™ is the perfect surface preparation tool for
large, flat, solid surfaces.
IMPORTANT - This tool is intended for outdoor use only on solid wood, masonite
siding, wood siding, concrete and steel for paint preparation. If the surface you
want to prepare for paint is rotted or damaged, it should be replaced.

Parts and Components

Strap
Red disc
lock button
Disc*
* Replacement discs: P/N 0513041
(not to be used with anything other than the Paint Eater™)
** The power cord on this tool is not replaceable.

hand Positions

See the graphics below for the different options for hand placement when using the Paint
Eater™. The Paint Eater™ can be used whether you are right- or left-handed.
ON / OFF switch
(O = off / l = on)
Folding handle
Red handle lock button
Note: Squeeze red buttons on both
sides of handle base to unlock. Handle
will lock into place when fully vertical
or horizontal.
Specifications
Amps ........................ 3.2
Volts....... 120VAC, 60Hz
r/min ....................... 2600
Disc size ........4.5 inches
English
7