Descargar Imprimir esta página

General Information; Manual Purpose; Terminology And Symbol Legend; Specific Use - Lavorwash P85.0568 DC 2x12 V Manual Del Usuario

Publicidad

2. GENERAL INFORMATION

2.1

MANUAL PURPOSE

To make it easier to read about and look up various
subjects, refer to the table of contents at the begin-
ning of the section in your language.
This manual has been prepared by the manufacturer
and is an integral part of the product. As such, it must
be kept in a safe place for the machine's entire service
life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this
manual so that they strictly follow the instructions
described herein.
Constant compliance with the instructions provided
in this manual is the only way to guarantee the best
results in terms of safety, performance, efficiency and
service life of the product you now own. Non-com-
pliance with these rules may cause injuries to people
and damage to the machine, the scrubbed surface
and the environment: in no case can such injuries or
damage be attributed to the manufacturer.
This manual refers in detail to the machine and pro-
vides instructions and descriptions only about our
batteries and battery chargers (optional).
The batteries and the battery charger are basic com-
plementary machine parts and will affect its operation
in terms of running time and performances. Only the
correct combination of the two accessories (batteries
and battery charger) will ensure the highest possible
performances and avoid wasting lots of money. For
more detailed information refer to the special battery
and battery charger manuals.Our recommended bat-
tery chargers and batteries (optionals) ensure the best
combination with the machine and offer outstanding
versatility (battery charger) as well as the category's
highest quality and performance standards.
2.2
TERMINOLOGY AND SYMBOL LE-
GEND
For the sake of clarity and to efficiently highlight the
various aspects of the instructions provided, terms
and symbols were used that are defined and illus-
trated here below:
- Machine. This definition replaces the commercial
name to which this manual refers.
- Operator. 'operator' means the person or persons
given the task of installing, operating, adjusting,
maintaining, cleaning, repairing or transporting ma-
chinery.
- Technician. A technician is considered a person
who has the experience, technical education, legis-
lative and regulatory knowledge that allows him to
carry out any type of required work, and the ability to
recognise and to avoid possible risks during machine
installation, and maintenance.
- INDICATION SYMBOL Particularly important
information to avoid machine malfunctions.
- ATTENTION SYMBOL Very important informa-
tion to avoid serious damage to the machine and to
the environment in which it operates.
- DANGER SYMBOL Vital information to avoid se-
rious (or extreme) consequences affecting the health
of persons and causing damage to the product and
the environment in which it operates.
Total weight (ready to operate)
Max. working range incline 2%
(Max. transporting range incline 10%)
Rated power brush drive
Rated power suction turbine
2.3
PRODUCT IDENTIFICATION
The nameplate located under the dashboard, above
the battery connector, contains the information.
2.4

SPECIFIC USE

This appliance is suited for the commercial use, e.g. in
hotels, schools, hospitals, factories, shops, offices, and
rental companies.
This machine is a floor scrubber-drier: it must be used
to scrub and to vacuum liquids of flat, rigid, horizon-
tal, smooth or moderately rough and uniform floors
that are free from obstacles in both civic and indus-
trial environments. Any other use is prohibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a water
and detergent solution (adjustable) on the surface
to be cleaned, while the brushes remove any dirt on
the ground. The machine's suction system, using a
ground squeegee, perfectly dries the liquids and the
dirt just removed from the front brushes in a single
pass.
By efficiently combining a cleaning detergent with
various types of brushes (or abrasive disks), the ma-
chine can adapt to all the various combinations of
floors and dirt.
2.5

TECHNICAL MODIFICATIONS

The manufacturer reserves the right to make techni-
cal modifications to the product, without prior notice,
in order to make the necessary technical upgrades or
improvements. For this reason, some details of your
machine may be different from the information in the
27

Publicidad

loading