Chapter 1 - General Informations; Chapter 2 - Purposes / Intended Use; Chapter 3 - Preparation (Unpacking) - Lavorwash SWL 990 ET Manual De Instrucciones

CHAPTER 1 - GENERAL INFORMATIONS

ATTENTION: READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THE
MACHINE
THE MANUFACTER DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS
RESULTING FROM FAILURE TO COMPLY WITH THE INSTRUCTIONS IN THIS MANUAL AND FROM INCORRECT
ALWAYS KEEP THIS MANUAL HANDY FOR QUICK REFERENCE (IN CASE OF LOSS, ASK YOUR DEALER FOR
THE MANUFACTER RESERVES THE RIGHT TO MAKE CHANGES OR UPGRADE ITS MACHINES, WITHOUT ANY
ALL SWEEPERS CONFORM TO EEC STANDARDS AND ARE LABELLED:

CHAPTER 2 - PURPOSES / INTENDED USE

To make it easier to read about and look up various subjects, refer to the table of contents at the beginning
of the section in your language . This manual has been prepared by the manufacturer and is an integral part of
the product . As such, it must be kept in a safe place for the machine's entire service life until demolition .
The customer must ensure that machine operators have read or are familiar with the contents of this
manual so that they strictly follow the instructions described herein .
Constant compliance with the instructions provided in this manual is the only way to guarantee the best
results in terms of safety, performance, efficiency and service life of the product you now own. Non-compliance
with these rules may cause injuries to people and damage to the machine, the scrubbed surface
and the environment: in no case can such injuries or damage be attributed to the manufacturer .
This manual refers in detail to the machine and provides instructions and descriptions only about our
batteries and battery chargers (optional) .
The batteries and the battery charger are basic complementary machine parts and will affect its
operation in terms of running time and performances.
Only the correct combination of the two accessories (batteries and battery charger) will
ensure the highest possible performances and avoid wasting lots of money. For more detailed
information
refer to the special battery and battery charger manuals.
Our recommended battery chargers and batteries (optionals) ensure the best combination with the
machine and offer outstanding versatility (battery charger) as well as the category's highest quality
and performance standards.

CHAPTER 3 - PREPARATION (UNPACKING)

After removing the outer packaging, remove the machine from the pallet; this operation can be done in two
ways:
1 . Take a hook and 4 tie-rods of suitable lifting capacity for the weight of the machine (shown on the
CE plate) . Lift the motor bonnet and secure the four eyebolts or hooks in the threaded housings (the
lifting hooks are inside the collection bin Part. B FIG. 1 together with the side brushes and instruction
manuals); secure all four straps to their respective lifting hooks Part. A Fig. 1 and with the aid of a fork
lift truck or bridge crane (suitable for weight of the machine), lift this off the pallet and rest it on the
floor very slowly .
AND / OR IMPROPER MACHINE USE .
ANOTHER COPY)
OBLIGATION TO UPGRADE PREVIOUSLY- SOLD MACHINES .
20