Dell PowerConnect 6024 Manual Del Usuario página 113

snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth |
priv} [udp-port port] [filter filtername] [timeout seconds] [retries retries]
A continuación se muestra un ejemplo de los comandos de la CLI:
Console (config)# snmp-server host 12.1.1.1 Dell-community
Console (config)# end
Console# show snmp
Community- Community-
String Access
-------------- --------------
-- --
Community- Group name
String
-------------- ----------
--
OOB management stations
Community- Community-
String Access
-------------- --------------
-- --
Community- Group name
String
-------------- ----------
--
Traps are enabled.
Authentication-failure trap is enabled.
Version 1,2 notifications
Target Type Community Version
Address
-------- ---- --------- -------
View name IP address Type
----- ---------- ----
IP address Type
---------- ----
View name IP address Type
--------- ---------- ----
IP address Type
---------- ----
Udp Filter To
Port name Sec
----- ------- ---
Retries
-------