Dell PowerConnect 6024 Manual Del Usuario página 148

A continuación se muestra un ejemplo de los comandos de la CLI:
Console (config)# interface ethernet g18
Console (config-if)# description RD_SW#3
Console (config-if)# speed 100
Console (config-if)# shutdown
Console (config-if)# no shutdown
Console (config-if)# duplex full
Console (config-if)# negotiation
Console (config-if)# back-pressure
Console (config-if)# flowcontrol on
Console (config-if)# mdix auto
Console (config-if)# exit
Console (config)# exit
Console> set interface active ethernet g9
Console> show interfaces status
Port Type Duplex Speed
--- ------ ---- ---
g1 1G-Copper Full 1000
g2 1G-Copper Full 1000
g3 1G-Copper Full 1000
Flow Link Back
Neg ctrl State Pressure
--- ----- ----- -----
Enabled Off Up Disabled
Enabled Off Up Disabled
Enabled Off Up Disabled
Mdix
Mode
-----
Off
Off
Off