Fein ASW18-6 Instrucciones De Uso página 17

OBJ_BUCH-0000000252-002.book Page 17 Friday, July 14, 2017 9:34 AM
Mounting the extension (ASW 18-30 PC/ASW 18-45 PC/ASW 18-60 PC)
(optional accessory) (figure 7).
Loosen the clamping sleeve with the hook
wrench and remove the angle head.
Fasten the motor-shaft extension.
Mount the extension and lock it using the
hook wrench.
Slide the locking sleeve into the extension
and mount the connector onto the motor-
shaft extension.
Clean the mounting surface using a clean cloth
and a degreasing solvent. Apply retaining
compound to the threads.
Fig. 7
1.
2.
Angle head
3.
Motor-shaft extension
6.
7.
Extension
Clamping sleeve
Hook spanner
4.
5.
M = 15-20 Nm
Pay attention that the threads are grease-
free before applying the retaining com-
pound.
Mount the angle head onto the extension and
lock the clamping sleeve using the hook
wrench.
Additional information: Further information
on replacement of the output can be found
on the Internet under www.fein.com.
8.
Fig. 3
Locking sleeve
3/8"
9.
1/2"
9.
Connector
11.
en
17
9.
10.