Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000020-002.book Page 8 Tuesday, December 18, 2012 10:49 AM
en
8
Intended use of the power tool:
Hand-guided sander for dry belt sanding of
surfaces of metal, plastic, wood, composite
materials, paint/varnish, filler and similar
materials in weather-protected environments
with the application tools and accessories rec-
ommended by FEIN.
Operation of the power tool off power generators.
This power tool is also suitable for use
with AC generators with sufficient power
output that correspond to the Standard
ISO 8528, design type G2. This Standard is
particularly not complied with when the so-
called distortion factor exceeds 10 %. When
in doubt, please refer to the generator
instruction/specification guide.
Symbols.
Symbol, character
Explanation
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Man-
ual and the General Safety Instructions.
Before commencing this work step, pull the mains plug out of the
socket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false reac-
DANGER
tion can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Worn out power tools and other electrotechnical and electrical pro-
ducts should be sorted separately for environmental-friendly recycling.
Product with double or reinforced insulation
~ or a. c.
Alternating current
1 ~
Alternating current, single-phase
Operating the power tool off
WARNING
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
Publicidad
