Meanings Of Symbols - Metabo HPT CM 75EAP Manual De Instrucciones

English
Pay special attention to statements preceded by the
following words:
WARNING
Indicates a strong possibility of severe personal
injury or loss of life if instructions are not followed.
CAUTION
Indicates a possibility of personal injury or
equipment damage if instructions are not
followed.
NOTE
Helpful information for correct function and use.

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the
machine. Be sure that you understand
their meaning before use.
Cutter, Portable cut-off machine
CM75EAP / CM75EBP
It is important that you read, fully
understand and observe the following
safety precautions and warnings.
Careless or improper use of the unit
may cause serious or fatal injury.
Read, understand
warnings and instructions in this manual
and on the unit.
Always wear eye, head and ear
protectors, and also dust protection,
when using this unit
Choke
On / Start
Off / Stop
Emergency stop
Maximum spindle speed of the machine.
Warning: Do not use wheels that are
rated for speeds lower than the indicated
maximum spindle speed of the machine.
Fire warning! This tool generates sparks
when cutting metal.
Warning! Do not use damaged cut-off
wheel.
and follow all
2
Rotation direction of cut-off wheel
Cut-off wheel dimensions
Fuel and oil mixture
Carburetor adjustment - Idle speed
Carburetor adjustment - Low speed
mixture
Carburetor adjustment - High speed
mixture
Priming pump
Decompression valve
Hazardous dust and gas emission
warning
Kickback warning
Warning! Never use blades designed for
cutting wood.