Mounting The Lock (Lock Version Only); Mounting The Lock (No Lock Version Only) - Dometic DM 50NTE Instrucciones De Montaje Y De Uso

Installation
6.6

Mounting the lock (lock version only)

➤ Drill a hole with a diameter of 35 mm into the decor.
➤ Mount the lock together with the lock decor.
6.7

Mounting the lock (no lock version only)

Disassembling the drawer (fig. 0, page 8)
➤ Open the drawer completely (A).
➤ Press the rail lock (A 1).
➤ Pull the drawer out of the cabinet (B).
Only for DM50NTE D:
➤ Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
➤ Unscrew the two screws (C 2) of the door handle.
➤ Remove the door handle (C 3).
➤ Remove the gasket.
➤ Remove the lock cover.
Drilling the holes (fig. a, page 8)
➤ Drill a hole (A 1) with a diameter of 23.6 mm through the decor (only
DM50NTE D) and the door.
➤ Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50NTE D).
➤ Remove the decor frame (only DM50NTE D).
Assembling the lock (fig. b, page 9)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame.
➤ Screw (B 2) the decor frame (B 3) onto the door.
➤ Install the door lock (C 1).
➤ Install the lock catch (D 1) in the cabinet.
18
DM50NTE
EN