Mounting The Lock (Lock Version Only); Mounting The Lock (No Lock Version Only) - Dometic DM 50NTE Instrucciones De Montaje

DM50NTE
6.5 Mounting hotel's own door decor (DM50NTE F only)
The hotel's own door decor has to comply with the following requirements:
•
Maximum weight: 2 kg (4.41 lbs)
•
Maximum thickness: 14 mm (0.55 in)
➤ Fasten the decor with four screws.
6.6

Mounting the lock (lock version only)

➤ Drill a hole with a diameter of 35 mm (1.38 in) into the decor.
➤ Mount the lock together with the lock decor.
6.7

Mounting the lock (no lock version only)

Disassembling the drawer (fig. a, page 7)
➤ Open the drawer completely (A).
➤ Press the rail lock (A 1).
➤ Pull the drawer out of the cabinet (B).
Only for DM50NTE D:
➤ Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
➤ Unscrew the two screws (C 2) of the door handle.
➤ Remove the door handle (C 3).
➤ Remove the gasket.
➤ Remove the lock cover.
Drilling the holes (fig. b, page 7)
➤ Drill a hole (A 1) with a diameter of 23.6 mm (0.93 in) through the decor (only
DM50NTE D) and the door.
➤ Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50NTE D).
➤ Remove the decor frame (only DM50NTE D).
EN
Installation
17