Mounting The Lock (Lock Version Only); Mounting The Lock (No Lock Version Only) - Dometic DM 50NTE D Instrucciones De Montaje Y De Uso

DM 50NTE D, DM 50NTE F, DM 50NTE UPOE
DM50NTE D/F without UPOE
➤ Plug the AC connection cable into the AC voltage socket and connect it to the
AC mains supply.
✔ The Power Status LED lights up.
✔ The lamp lights up and the minibar starts cooling the interior.
6.5 Mounting hotel's own door decor (DM50NTE F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 4 kg (8.8 lbs)
• Maximum thickness: 18 mm (0.7 in) (lock version only)
➤ Fasten the decor with four screws.
6.6

Mounting the lock (lock version only)

1. Drill a hole with a diameter of 35 mm (1.38 in) into the decor.
➤ Mount the lock together with the lock decor.
6.7

Mounting the lock (no lock version only)

Disassembling the drawer (fig. a, page 8)
1. Open the drawer completely (A).
2. Press the rail lock (A 1).
3. Pull the drawer out of the cabinet (B).
Only for DM50NTE D:
1. Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
2. Unscrew the two screws (C 2) of the door handle.
3. Remove the door handle (C 3).
4. Remove the gasket.
5. Remove the lock cover.
EN
Installation
19